Products

Industrial Grade FX Hydrocyclone

The FX hydrocyclone operates on the principle of centrifugal sedimentation. When the two-phase mixture to be separated enters the cyclone at a constant pressure from the feed port, it generates a strong three-dimensional elliptical, highly rotating, shearing vortex. Due to the size difference between coarse and fine particles, they are subject to varying degrees of centrifugal force, centripetal force, buoyancy, and fluid resistance.
Send Inquiry
Small-diameter Cyclones for Non-metallic Minerals Processing(50-150mm)

In the processing of non-metallic minerals (such as quartz sand, kaolin, talc, and graphite), the classification and removal of fine-grained minerals are critical to product quality. Failure to accurately separate mineral particles of varying sizes not only compromises subsequent purification and further processing, but can also lead to the waste of high-quality mineral resources.
Send Inquiry
Rubber Ceramic Lining

The rubber ceramic lining is not a single material. Instead, it's a wear-resistant lining material created through a special process by combining high-hardness alumina ceramic with highly elastic natural rubber/nitrile rubber. Its core structure and performance can be summarized as a perfect combination of "hard protection + soft cushioning":
Send Inquiry
Industrial Wear-resistant Ceramic Plates Lining Boards Steel-Back Alumina Ceramic Liner

Core Performance Parameters 1. Material and Composition Alumina content ≥ 92%-99.9% (high-purity), density ≥ 3.5-3.6 g/cm Rockwell hardness HRA 85-88, wear resistance 260-271.5 times that of manganese steel and 171.5 times that of high-chromium cast iron. 2. Mechanical Properties Compressive strength ≥ 850 MPa, flexural strength ≥ 290 MPa, fracture toughness KIC ≥ 4.8 MPa·m/s Coefficient of thermal expansion 7.2×10⁻³m/m·K, thermal conductivity 20 W/m·K.
Send Inquiry
Steel-back Ceramic Liner Alumina Industrial Wear-resistant Ceramic Plates & Lining Boards

Steel-backed ceramic linings. Alumina industrial wear-resistant ceramic plates and linings are commonly used wear-resistant materials in the industrial field.
Send Inquiry
Alumina Special Ceramic Lined Pipe

Performance Features High Purity and Low Contamination: Some high-end alumina specialty ceramic-lined pipes are made of 99.99% high-purity alumina ceramic, which can control the iron content of the wafer to less than 5ppm and the metal ion contamination rate to below 0.1ppm, meeting the needs of industries with extremely high purity requirements, such as semiconductors.
Send Inquiry
Alumina Ceramic Liner Plate Industrial Ceramic Rings Ceramics Lining

Alumina ceramic liners, industrial ceramic rings, and ceramic linings are all commonly used ceramic components in the industrial field.
Send Inquiry
Alumina Industrial Wear-resistant Ceramic Pipe & Fittings with Ceramic-Lined Reducers

Alumina industrial wear-resistant ceramic pipes and accessories are key components used in industrial material transportation, offering excellent wear and corrosion resistance.
Send Inquiry
Alumina (Corundum) Industrial Ceramic Sleeves

Alumina (corundum) industrial ceramic sleeves are high-performance ceramic components made primarily from alumina and are widely used in industry.
Send Inquiry
95% Alumina Lined Steel Pipe

95% alumina-lined steel pipe is a composite pipe that combines 95% alumina ceramic with steel pipe. It leverages the ceramic's high wear and corrosion resistance with the steel pipe's high strength and good toughness, and is widely used in the industrial field.
Send Inquiry
Alumina Ceramic Parts Industrial Wear-resistant Custom Accessories-Alumina Rod Cutting Welding

Alumina ceramics, due to their high hardness, excellent wear resistance, and chemical stability, are widely used in custom parts for industrial wear-resistant applications. Alumina rods, a common base material, are crucial for custom production, with cutting and "welding" (a unique ceramic joining process) being key steps.
Send Inquiry
Alumina Ceramic High-temperature Corundum Sleeve Assembly With Irregular-Shaped Underflow Nozzle

The alumina ceramic high-temperature corundum sleeve assembly with a special-shaped underflow nozzle is an industrial component with excellent performance in high-temperature, wear-resistant, and corrosion-resistant properties.
Send Inquiry
Alumina Industrial Wear-resistant Tiles Wear-resistant Ceramic-rubber Composite Plate

Alumina industrial wear-resistant bricks and wear-resistant ceramic rubber composite plates are both commonly used wear-resistant materials in the industrial field.
Send Inquiry
Alumina Industrial Wear-resistant Ceramic Tiles, Fittings & Accessories With Ceramic Lining

Alumina industrial wear-resistant ceramic tiles, accessories, and ceramic lining accessories are key components for wear and corrosion resistance in the industrial sector and are widely used in thermal power, steel, chemical, and other industries.
Send Inquiry
Ceramic Al2O3 Alumina Wear Resistant Ceramic Liner / Lining Tiles

Ceramic Al₂O₃ alumina wear-resistant ceramic lining plates and lining bricks are both industrial wear-resistant materials made primarily of alumina and are widely used in the industrial sector.
Send Inquiry
Industrial Grade Alumina Ceramic Liner

Industrial-grade alumina ceramic linings are wear-resistant materials made primarily from alumina using a special process. They are widely used in industry.
Send Inquiry
Segmental Alumina Ceramic Wear Tiles & Liners

Segmented alumina ceramic wear-resistant bricks and linings are important components for wear and corrosion resistance in the industrial sector.
Send Inquiry
Al2O3 Alumina Ceramic Liner Tiles Wear Resistant Structure Ceramic Lining

Al₂O₃ alumina ceramic linings are a common type of wear-resistant structural ceramic lining. Wear-resistant structural ceramic linings are ceramic linings used inside equipment to provide protection against wear, impact, and corrosion. Alumina ceramic linings, due to their excellent performance, play a key role in this category.
Send Inquiry